Windows XP/Windows 7/Windows 8/Windows 10
In order to connect to the Access Point, you must first configure the TCP/IPv4 connection of your Windows OS computer system. (Unless you already have an IP in the same subnet.)
Step 1: Open the Control Panel
[Windows XP / 7] Click the Start button and open the Control Panel.
Windows XP step 1
Windows 7 step 1
[Windows 8] Move your mouse to the lower right hot corner to display the Charms Bar and select the Control Panel.
Windows 8 step 1
[Windows 10] Click Start to select All APPs to enter the folder of Windows system for selecting Control Panel.
Windows 10 step 1
Step 2: Open the connections/adapters.
[Windows XP] Click “Network Connections”.
Windows XP step 2
[Windows 7 / 8 / 10] Click “View Network Status and Tasks” in the “Network and Internet section”, then select “Change adapter settings”.
Windows 7 / 8 / 10 step 2
Step 3: Right click on “Local Area Connection” and select “Select Internet Protocol Version 4 (TCP/IPv4)” and then select Properties.
Windows step 3
Step 4: Select “Use the following IP address” and enter an IP address that is different from the Access Point, but in the same subnet and enter the same subnet mask.
Windows step 4
For example: ENH220EXT IP address: 192.168.1.1
PC IP address: 192.168.1.10 (or any free IP in the range from 192.168.1.2 up to and including 192.168.1.254).
PC Subnet mask: 255.255.255.0
Step 5: Press OK when done.